Introduction
FOX3-2G/3G/4G Series Hardware Manual
11
Architecture Integrates
- 1 x Power supply lines
- Backup battery 1000 mAh (B1
Option)
- 3 x Multi-line I/O
- IOBOX-MINI - I/O extension module
- 1 x Ignition
- IOBOX-CAN - Second CAN-Bus interface
- 3 x LED indicators
- Car installation cable (more cables in the Ordering Guide)
- 2 x RS232 port (RX, TX, GND) V24
- CAN-Bus Interface
- 1 x 2.5mm audio port (not available on all models)
- 1 x USB port
- 1 x SPI interface (for IOBOX-MINI/ BT / CAN)
- 1 x 1-Wire port
- 1 x I²C port
- 2 x External antenna port
- 8 x Mounting Holes
T
able 2:
FOX3-2G/3G/4G architecture
Figure 4:
FOX3-2G/3G/4G block diagram
1.6.
Related documents
In addition to this document, the following files comprise the full set of
and
NR
P
DF file name
Description
[
1]
AVL_PFAL_Command_Set.pdf
Contains the description of the internal firmware and the supported
Configuration Command Set for the AVL devices.
[
2]
AppNotes_Transform_history_data.pdf
Contains information of how to decode history data that are being
transmitted from an AVL device via TCP connection.
[
3]
AppNote_Remote_update.pdf
Contains information of how to upgrade AVL devices to a new firmware
revision remotely via TCP (server based application).
[4]
A
ppNotes_AVL_Installation_Guide.pdf
This document provides all the necessary information how to install your
product properly and safely in a vehicle.