manualshive.com logo in svg

Lantronix ETS, Справочное руководство

Поделиться
Скачать
Lantronix ETS Скачать руководство пользователя страница 289

C-1

C:  Updating Software

Current software files (ETS*.SYS) are available on the distribution CD. Software updates and release notes 
for the ETS can be downloaded directly from the Lantronix development systems via the Lantronix World 
Wide Web site (www.lantronix.com), or via anonymous FTP through the Internet (ftp.lantronix.com). 

C.1   Obtaining Software

C.1.1   Via the Web

The latest version of ETS*.SYS can be downloaded from the Lantronix Web site. The following instructions 
will lead you through the web site to the software file.

1

On the home page, http://www.lantronix.com, click on Firmware Downloads.

2

From the All Products pop-up menu, select Terminal Servers: ETS.

3

From the All Categories pop-up menu, select Latest Firmware and Software.

4

Click the Submit button. You will go to a page that shows links for ETS-related firmware and soft-
ware.

5

From the available files, select Latest firmware for ETS4P, ETS8P, ETS16P, ETS16PR, 
ETS32PR, and ETS422PR Multiport Device Server.

6

Click the Submit button. You will go to a page that describes the selected software file.

7

If this is the correct file, click the Download ETS4P, ETS8P, ETS16P, ETS16PR, ETS32PR, and 
ETS422PR Firmware VX.X/X Binary link. If it is not the correct file, use your browser’s Back but-
ton to return to the previous page to choose a different option.

Note:

As a result of Netscape Navigator’s configuration, it may try to open the file as 
an ASCII text file. To avoid this, hold down the shift key when choosing the 
software file.

C.1.2   Via FTP

The ETS software resides on the Lantronix FTP server (ftp.lantronix.com). Most of these files are binary 
data, so the binary option must be used to transfer the files. All released files are in the pub directory. 
Always download the Readme file in the pub directory before downloading anything else; it contains a list 
of available software files.

Содержание ETS

























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды