Lantronix ETS Скачать руководство пользователя страница 115

Страница: 115 / 312

TCP/IP Host Setup

Reverse Telnet (RTEL)

7-13

Figure 7-14: Installing the Backend Filter

The options area specifies which if any of the print options are enabled. The available choices are listed in
Table 7-1.

# cd /usr/spool/rtel

# ./mkprt

Installing a print queue requires root privileged. Do you want to con-

tinue the installation [yes]

Please enter the name of the print queue to create: hp4

A printcap entry for hp4 needs to be created.

hp4|RTEL printer:\

:lp=/usr/spool/rtel/hp4_dev:\

:of=/usr/spool/rtel/hp4:\

:sd=/usr/spool/rtel/hp4_sd:

Should this entry be added to your printcap file [y]: yes

In order to establish RTEL connections, an IP address and a host name

must be assigned to the terminal server.

Please enter the server’s host name []: ps3

A connection on the server can be specified by either a port number or a

service name. A port number is simpler, but a service allows more

flexibility.

Would you like to specify a (p)ort number or a (s)ervice name [p]: p

Please enter the port number []: 2

By default, a password is not needed to connect to a service or a port.

(Note that the word null actually means no password.)

Please enter the password [null]:

The following options are available:

banner ------- Print a banner page before every job

binary ------- Do not format data for printing

expandtabs --- Expand tabs into spaces

formfeed ----- Append formfeed to end of job

none --------- No options are to be used

postscript --- Append <ctrl-d> to postscript job

Please enter a comma separated option string [none]: none

The following entry has been added to the server_host file

queue server service password option

hp4 ps3 :2 null none

Installation of queue hp4 complete

Table 7-1: Print Options

Option

Functionality

Banner

A banner page is printed before each job. The banner will show
the date, name of the job, and name of the user who requested it.

Binary

No Line Feed processing is performed. This is useful for non-text
files (such as plotter or graphics files).

Expandtabs

Tabs are changed into space characters. Eight space tabs are
assumed.

Содержание ETS

























































































































































































































































































































Результаты поиска

Содержание ETS

Отзывы:

Бренды по названию

Популярные бренды

Lantronix ETS, Справочное руководство

Результаты поиска

Содержание ETS

Отзывы:

Бренды по названию

Популярные бренды