Lantronix ETS, Справочное руководство

Страница: 129 / 312

NetWare Host Setup Printing
8-7
8.3.4 Installing a Print Queue Using PCONSOLE
The following detailed steps refer to NetWare v3.11, but are similar for v2.x. Be sure to note the name of
the print server; it is located on the back or underside label.
1 Log in as Supervisor on the file server.
2 Type
PCONSOLE
at the F: prompt and press Enter to start the utility.
Figure 8-13: Starting PCONSOLE
3
Using the cursor keys, select Print Server Information from the Available Options menu, then
press Enter.
Figure 8-14: Print Server Information Option
You will see a list of current print servers.
4 Press Insert to create a new entry, add the ETS name, and press Enter.
Figure 8-15: Entering ETS Name
This is the name that the ETS will log in as when querying the file server’s print queues. If you later
change the ETS name, you will need to update the file server(s).
If you change the login password on the ETS, you will need to add a password for the entry you just
added. Highlighting the ETS name and pressing Enter shows the Print Server Information menu,
in which you can change the ETS password.
5 Use Insert to add the name of the service on the ETS which will service the queue, and press Enter.
The example below adds a service named
LABPRT_S1
.
Figure 8-16: Entering Services
6 Press Escape to return to the Available Options menu.
7 Repeat step 1 through step 5 for all necessary queues. When no other configuration is desired, the ETS
must be told to rescan the file server queues so that it is aware of the modifications. This can be done
with the following steps.
F:> PCONSOLE
Available Options
Change Current File Server
Print Queue Information
Print Server Information
Enter Print Server Name: LAB_ETS
Enter Print Server Name: LABPRT_S1