manualshive.com logo in svg

Lantronix ETS, Справочное руководство

Поделиться
Скачать
Lantronix ETS Скачать руководство пользователя страница 113

TCP/IP Host Setup

Reverse Telnet (RTEL)

7-11

2

Set your current directory to the RTEL directory.

Figure 7-12:  Restoring RTEL software

Note:

The word “cdrom” in the example above should be replaced with the name of the 
current distribution CD-ROM.

For MS-DOS, the source code will be in a single tar archive file (rtel_src.tar). This file contains all of 
the source code, but does not contain any executables. 

3

Copy the tar archive file onto the host system, remembering to use binary mode during the copy.

4

Untar the archive. 

5

Recompile the software on the target machine. This will be done automatically for supported systems.

6

Once all the files are in place, issue the command ./lpinstall. This script moves everything necessary 
to run the RTEL software into the /usr/spool/rtel directory tree. 

Figure 7-13:  RTEL Installation

Note:

At this point, the source code can be removed from the system. 

7

Create and install backend filter program, or set up a named pipe and start the RTELPD daemon pro-
cess. For instructions on how to do this, consult the README files in the newly-installed RTEL di-
rectory.

7.3.3   Queueing with the RTEL Software

A job can be queued by the host’s print system (lp, lpr, and others) or by the ETS itself. If you are only 
printing to one queue from one host to one ETS service, the queueing is provided by the host; it will not 
release a new job to the ETS until the previous job has completed. 

# mkdir /tmp/rtel

# cd /tmp/rtel

# tar xvf /

cdrom/products/servers/rtelv4_2_2/rtel_src.tar

# ./lpinstall

Installing the RTEL software package requires root privi-

leges. Do you want to continue the installation [yes]

The RTEL binaries are provided for the following machines:

AIX ---- IBM RS6000 based machines

HP ----- HP/UX HP/PA based machines

MIPS --- RISC/OS

SCO ---- SCO UNIX

SGI ---- IRIX

SOL ---- Solaris Sparc machines

SPARC -- Sun/OS Sparc machines

other -- (input file extension of other)

Please select your machine type: sparc

Please select type of spooling system to install [lpr]

Installation of RTEL software package complete.

#

Содержание ETS

























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды