Lantronix CoBox-FL, Руководство пользователя

Страница: 61 / 135

Configure
Send Characters: If 2-Byte Send Character Sequence is enabled, the unit interprets the
dently.
dy in the serial buffer
are included in the transmission after a "transmit" condition is found. If set, the unit sends
ransmit condition (sendchar or timeout).
sent
the
line (for example, ETX, EOT,
etc.). Setting the first sendchar to 00 disables the recognition of the characters. Alternatively,
see
Pack Control
on page 3-22).
al name
ptions, which can be used for applications like terminal emulation to IBM hosts.
ord
eter po assword option is enabled in Disconnect
isC
20). If set, you can set a password on the serial port.
sendchars as a 2-byte sequence; if not set, they are interpreted indepen
If Send Immediately After Characters is not set, any characters alrea
immediately after recognizing the t
Note: A transmission might occur if status information needs to be exchanged or an
acknowledgment needs to be sent.
3.6.11 DisConnTime (Inactivity Timeout)
Use this parameter to set an inactivity timeout. The connection is dropped if there is no
activity on the serial line before the set time expires. Enter time in the following format:
mm:ss , where m is the number of minutes and s is the number of seconds. To disable the
inactivity timeout, enter 00:00 .
3.6.12 Send Characters
You can enter up to two characters in hexadecimal representation in the parameters
"sendchar." If a character received on the serial line matches one of these characters, it is
immediately, along with any awaiting characters, to the TCP connection. This minimizes
response time for specific protocol characters on the serial
the two characters can be interpreted as a sequence (
3.6.13 Telnet Terminal Type
This parameter appears only if the terminal type option is enabled in Disconnect Mode (see
DisConnMode
on page 3-20 above). If this option is enabled, you can use the termin
for the Telnet terminal type. Enter only one name.
If the terminal type option is enabled, the unit also reacts to the EOR (end of record) and
binary o
3.6.14 Channel (Port) Passw
This param
Mode (see
D
appears only if the channel (
onnMode
on page 3-
rt) p
CoBox-FL User Guide 3-23