Lantronix CoBox-FL, Руководство пользователя

Страница: 85 / 135

UDP
8.2 Configuring Multiple Devices
When configuring a number of Device Servers identically, it is useful to create a template
setup record. The setup record can then be sent to the “target” Device Servers from a
paste” or UDP (see
Network Configuration using UDP
on page 8-
Device Servers use a 120-b te tu ec te e r t. This format facilitates the
transfer of binary data using ASCII characters. Se
Setup Records
on page 8-7 and
The Intel
H
e 8-5 f r inform tion bo set p records and converting them to Intel
Hex for
:20000010AC10C81D0000100000000000AC10010B4C0200001127000000000000C000
011
201000000 00 00 0 0 00 00 00 0000000000000000000000000
0
040104C020 01 70 0 0 0C 00 00 0000000000000000000000000
049
0601000000 0 0 00 00 00 00 00 000000000000078
etup record:
igured Device Server via Monitor Mode
asiest method).
roperly evice Server via another Device
p recor rly c ured Device Server via
1. Configure a “master” Device Server with the desired parameters.
2. Enter Monitor Mode on the master Device Server (see
Monitor Mode
on page 7-1).
3. At the prompt, enter GC followed by a carriage return. The Device Server will respond
with its setup record in Intel Hex format.
4. Copy the setup record into a text file and save it for future use.
“master” Device Server via “cut and
1).
y se p r ord in In l H x fo ma
e
ex Format
on pag
mat.
o a a ut u
000
:2000
0000B
00 00 000 000 00 00 00 00
:200 00 22 000 000 00 00 00 00
000
:180
:00000001FF
000 000 00 00 00 00 00 00
Figure 20 - Sample Setup Record in Intel Hex Format
8.2.1 Acquiring a Valid Setup Record
There are a number of ways to acquire a valid s
•
Copy the setup record of a properly conf
(e
•
Request the setup record of a p configured D
Server on the network.
•
Build the setup record in software.
•
From a host PC, request the setu d of a prope onfig
UDP.
To copy the setup record of a properly configured Device Server:
CoBox-FL User Guide 8-3