Lantech LGS-2624C, Руководство пользователя, Страница: 77 / 279

Web Interface
To configure the Spanning Tree Bridge Settings parameters in the web
interface:
1. Click Configuration, Spanning Tree, Bridge Settings
2. Scoll to select the parameters and write down available value of
parameters in blank field in Basic Settings
3. Evoke to enable or disable the parameters and write down available
value of parameters in blank field in Advanced settings
4. Click the save to save the setting
5 .If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Parameter description:
Basic Settings
Protocol Version
The STP protocol version setting. Valid values are STP, RSTP and MSTP.
Bridge Priority
Controls the bridge priority. Lower numeric values have better priority. The
bridge priority plus the MSTI instance number, concatenated with the 6-byte
MAC address of the switch forms a
Bridge Identifier . For MSTP operation,
this is the priority of the CIST. Otherwise, this is the priority of the
STP/RSTP bridge.
Forward Delay
The delay used by STP Bridges to transit Root and Designated Ports to
Forwarding (used in STP compatible mode). Valid values are in the range 4
to 30 seconds.
Max Age
The maximum age of the information transmitted by the Bridge when it is
the Root Bridge. Valid values are in the range 6 to 40 seconds,
and
MaxAge must be <= (FwdDelay-1)*2.