20
21
7. TROUBLESHOOTING
Troubleshooting the Lansinoh
®
Smartpump 2.0 Double Electric
Breast Pump
Interruption of Electrical Service
The Smartpump 2.0 will shut off during a pumping session if the power source is
changed while pumping.
This includes unplugging the power adapter or inserting the power adapter while
pumping using batteries.
This safety feature is designed to prevent sudden changes in suction levels. If
you lose power during a pumping session because you switched power sources
mid-pumping session, simply press down on the power button to turn the pump
back on.
If you experience an interruption in the normal operation of the electrical and/or
mechanical function of the pump, simply do the following:
•
Verify the power cord is still plugged in to the pump or the wall. If using
batteries, verify all six batteries are fully inserted and none have come loose.
•
If either the power cord or batteries became disconnected, fix the connection,
and then press and hold the power button for two seconds to turn the pump
back on.
•
If the pump is shutting off and the adapter or batteries were firmly in place
when this occurred, please Lansinoh Customer Service at
0113 259 1425
or
.
Discomfort While Pumping
If you feel any discomfort, you may need a different size cushion.
Visit
lansinoh.co.uk/parts
or call
0113 259 1425
.
Decreased Suction
If it feels like the suction has decreased, try the following:
•
Remove the tubing from pump and place a finger over the tubing connector.
•
If you feel suction, the pump is operating properly, but the breastmilk expression
set may not be correctly assembled or the white valve may be damaged.
•
Make sure the breastmilk expression set has been properly assembled. Check
the assembly information in the section “Assembling the Breastmilk Expression
Set,” page 12-14.
•
Inspect the white valve for a tear or pinhole. This component is critical to
achieving proper suction. Replace the white valve with one of the spare valves
provided with the product.
8. BREASTMILK STORAGE GUIDELINES
Breastmilk Storage and Thawing Guidelines for Healthy Term Babies
Check with your healthcare professional or an International Board Certified
Lactation Consultant for specific storage instructions. When freezing breastmilk,
store in the back of the freezer. Do not store breastmilk in the freezer door as the
temperature can fluctuate when the door is opened and closed. Before storing,
date all breastmilk and use the oldest breastmilk first.
These breastmilk storage guidelines are a recommendation. Contact your health
professional or consult your country’s national guidelines for further information.
WHERE
TEMPERATURE
TIME
ACTION
At Room
Temperature
60-85°F
(16°-29°C)
4 hours (ideal)
up to 6 hours
(acceptable)
Contents should be covered
and kept as cool as possible;
covering the container with
a damp towel may keep
milk cooler
Insulated
Cooler Bag
5-39°F
(-15° to 4°C)
24 hours
Keep ice packs in constant
contact with milk containers;
limit opening cooler bag
In a Refrigerator
39°F
(4°C)
4 days (ideal) up to
5 days (acceptable)
Store milk in the back of the
main body of the refrigerator
Freezer
(compartment of
refrigerator with
separate doors)
0°F
(-18°C)
3 months (ideal)
up to 6 months
(acceptable)
Store milk away from sides
and toward the back of the
freezer where temperature is
most constant
Deep Freezer
-4°F
(-20°C)
6 months (ideal)
up to 12 months
(acceptable)
Source: La Leche League International 2017
Milk Storage Guidelines, Full term infant
•
If no suction is felt on your finger, try unplugging the adapter from the
electrical outlet, wait a few seconds, and plug it back into the electrical outlet.
•
When single pumping, check the tubing connector on the front of the pump to
make sure it is closed for single pumping. If open, close the connector.
•
If double pumping, ensure that the breastmilk expression set is securely
connected on both breasts before starting the pump.
Increased Suction Level for Single Pumping
If it feels like the suction is higher than usual when single pumping, check that
the plug for the pipe is clean and that the airway in the plug is not blocked.
