background image

22

23

9. LANSINOH® BOTTLE WITH NATURALWAVE™ TEAT

Clinically Proven to Reduce Nipple Confusion in Breastfed Babies

The patented NaturalWave™ Teat enables 
baby to replicate natural sucking actions 
learned at the breast.

Exclusive breastfeeding is recommended 
for at least 4-6 weeks if possible before 
introducing a bottle and teat.

Storage & Use

Prior to use, always inspect and pull the teat 
in all directions to check the product. Throw away at the first signs of damage or weakness. 
For safety and hygiene reasons, replace the teat every 7 weeks.

Cleaning

Before first use, boil all parts for 5 minutes to sanitise. Ensure all parts are completely 
covered in water and free floating. Always wash all components of the product immediately 
after each use. The teat can be washed in hot soapy water and rinsed in clean water. 
Dishwasher safe on top rack only. Do not clean with solvents or harsh chemicals.

Assembly

Once thoroughly dry, insert teat through the top of the 
screw cap collar. Attach the screw cap collar securely 
onto the bottle neck. When carrying a full bottle, make 
sure it is closed with the collar in place, taking care to 
position the teat in the center of the collar to activate 
the “spill-proof” function of the product.

Latching on

 

Baby’s lips open outward and latch 

onto the areola

Peristaltic “wave-like” tongue movement

 

Baby’s tongue moves in “wave-like” motion 

to compress nipple and extract milk

Swallowing 

Back of baby’s tongue rises, channeling 

the milk into the esophagus

10. TECHNICAL DATA

1.  Power Supply

Battery operation: 

6 AA size alkaline batteries, all connected in series

Operating time: 

Minimum 30 minutes. Maximum 2 hours. Results are 

dependent on battery freshness and pump settings.

AC Adapter operation: 

100-240 Vac wall plug type AC adapter, galvanically 

isolated with 9Vdc output voltage

Pump power dissipation: 

10.0 Watts maximum

Voltage regulation: 

Linear voltage regulator with low dropout voltage and 

short circuit protection

2. Control System

Control unit: 

Microcontroller with integral program memory

Program memory:

 32K flash ROM, 2K RAM memory

HMI: 

LCD display with LED backlight, soft keypad 

Single/double control: 

Single or double breast pumping possible

Selectable pumping style mode:

 3 pumping style modes are selectable 

and controlled from keypad

Adjustable suction level:

 8 suction levels are selectable and controlled 

from keypad

Suction vacuum level: 

Minimum 80 mmHg, maximum 250 mmHg

Cap

Teat

Collar

Bottle

Insert the 

teat into top 

of the collar

NOTE: 

DO NOT MICROWAVE BREASTMILK! Microwaving alters the 

composition of the milk. Microwaving also may create “hot spots” in the 

milk that could burn the infant.

NOTE:

 DO NOT thaw breastmilk in hot or boiling water.

Thawing

Thaw frozen milk in the refrigerator or place the containers 
under cool running water, gradually warming the water 
until the milk is thawed. Thawed milk can be kept in a 
refrigerator for up to 24 hours.

Breastmilk is not homogenised and you may notice that it separates as it sits. 
Gently swirl thawed milk before feeding to baby to mix the layers that have 
separated. Breastmilk can vary in colour and consistency depending upon the 
time of the day that the milk was expressed, what you have eaten, and the age 
of the baby at the time of pumping. For further advice, please contact your 
healthcare professional.

Precautions

Do not leave bottle in direct sunlight, heat or disinfectant (sterilising solution), as this may 
weaken the teat. Do not clean with or allow teat to come into contact with solvents or 
harsh chemicals. Damage could result. Fill with the required amount of liquid and tighten 
the screw cap before using. Do NOT overfill. Heating in a microwave is NOT recommended 
as it may produce uneven heating and high localised temperatures. If you choose to heat 
liquid this way, DO NOT SEAL BOTTLES. Swirl well before use, and always check the 
temperature before feeding baby. Hot or unevenly heated liquid may burn baby’s mouth. 
Do not warm liquid by placing the bottle directly onto gas or electric rings, warming plates, 
in electric ovens, etc. Wash after every use. Some liquids and sterile solutions may make the 
silicone turn opaque. This does not alter any of its properties.

WARNING!

DO NOT MICROWAVE BREASTMILK! Microwaving alters the composition of the milk 
and may also create “hotspots” in the milk that could burn the infant. Allowing your child 
to use this product for prolonged periods separate from regular mealtimes or to go to 
sleep while drinking liquids, other than water, from this bottle may cause or contribute 
to early childhood tooth decay. Always use this product with adult supervision. Keep all 
components not in use out of the reach of children. Do not leave baby alone with drinking 
equipment due to the risk of choking. Never use teat as a soother. Always check liquid 
temperatures before feeding.

NOTE:

 

DO 

NOT refreeze 

milk once it is 

thawed.

Содержание SM ARTPUMP 2.0
















Отзывы: