14
15
5.1 Power Options
The pump may be operated using the following power supply modes:
AC Adapter
1.
Connect the AC adapter to the power
receptacle located on the right side
of the pump. Plug the AC adapter
into an available electrical outlet.
2.
Electrical safety can only be achieved
when the breast pump is connected
to the AC power adapter supplied
with the product. (See “Technical
Data” section, page 23)
AA Alkaline Batteries (not included)
1.
Make sure the batteries are inserted
correctly according to the polarity (+)
and (-) as indicated.
2.
Close the compartment by gently
pressing the cover until it snaps
into place.
•
Remove batteries if pump is not in use
for a long period of time.
•
Dispose of batteries according to
regulations for environmental protection and recycling.
•
Replace batteries as a simultaneous set. Do not mix old and
new batteries.
•
Do not mix alkaline and standard (carbon-zinc) batteries.
•
If batteries are in the pump, but AC adapter is in use, the pump will use the
adapter to power the pump, not the batteries.
For the most economical use, we recommend using your pump with the AC
adapter provided. Your AC adapter is a universal AC plug adapter type and can
be used with 100 Vac to 240 Vac systems with 50Hz and 60Hz mains.
3.
Insert pump connector into
opening on left side of pump.
2.
Secure other end of 600mm
tubing firmly to the pump
connector.
1.
Secure one end of 600mm tubing
to tubing Y connector.
4.2 Connecting the Breastmilk Expression Set
Once Breastmilk Expression Set is assembled, connect to pump base:
4.3 Connecting for Single Pumping
1.
Remove one of the 300mm
tubing from the tubing Y
connector.
2.
Secure plug into open outlet of
tubing Y connector.
5. USING THE LANSINOH® SMARTPUMP 2.0
DOUBLE ELECTRIC BREAST PUMP
