Lanier LD225 Скачать руководство пользователя страница 67

Страница: 67 / 184

Settings You Can Change with User Tools

Settings You Can Change with User Tools

Reference

To access User Tools, see p.54 “Accessing User Tools (System Settings)”.

General Features

❖

Panel Tone

The beeper (key tone) sounds when a key is pressed.

Note

❒

Default:

❖

Warm Up Notice (copier/Document Server)

You can have the beeper sound when the machine becomes ready to copy af-
ter leaving Energy Saver mode, or when the power is turned on.

Note

❒

If the Panel Tone setting is “OFF”, the beeper does not sound, whatever the
Warm Up Notice setting.

❒

Default:

❖

Copy Count Display (copier/Document Server)

The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).

Note

❒

Default:

Up (count up)

❖

Function Priority

You can specify the mode to be displayed immediately after the operation
switch is turned on, or when System Reset mode is turned on.

Note

❒

Default:

Copier

RuC4_EN_gsg-F_FM_forPaper.book Page 55 Tuesday, April 5, 2005 12:06 PM

Содержание LD225

























































































































































































Результаты поиска

Содержание LD225

Отзывы:

Lanier LD225, Руководство по настройкам, Страница: 67 / 184

Результаты поиска

Содержание LD225

Отзывы: