manualshive.com logo in svg

Lanier LD225, Руководство по настройкам, Страница: 158 / 184

Поделиться
Скачать
Lanier LD225 Скачать руководство пользователя страница 158

Remarks

146

7

❒

Do not carry the machine, by hold-
ing the scanner assembly. Keep the
machine level and carry it careful-
ly, taking care not to jolt or tip it.
Rough handling may cause a mal-
function or damage the hard disk
or memory, resulting in loss of
stored files.

❒

Do not take off the holding stand.

❒

Protect the machine from strong
shocks. Impact can damage the
hard disk and cause stored files to
be lost. As a precautionary meas-
ure, files should be copied to an-
other computer.

Power Connection

R

 

WARNING:

R

 

CAUTION:

R

 

CAUTION:

• When the main power switch is in

the stand-by position, the optional
anti-condensation heaters are on.
In an emergency, unplug the ma-
chine's power cord.

• When you unplug the power cord,

the anti-condensation heaters turn
off.

• Make sure the plug is inserted

firmly in the wall outlet.

• Voltage must not fluctuate by more

than 10%.

• The wall outlet shall be installed

near the machine and shall be eas-
ily accessible.

Access to the Machine

Place the machine near the power
source, providing the clearance areas
shown.

1.

Rear: more than 1 cm (4")

2.

Right: more than 1 cm (4")

3.

Front: more than 75 cm (29.6")

4.

Left: more than 1 cm (4")

Note

❒

For the required space when op-
tions are installed, contact your
service representative.

•

Connect the machine only to 
the power source described on 
the inside front cover of this 
manual. Connect the power 
cord directly into a wall outlet 
and do not use an extension 
cord.

•

Do not damage, break or make 
any modifications to the power 
cord. Do not place heavy ob-
jects on it. Do not pull it hard 
nor bend it more than neces-
sary. These actions could 
cause an electric shock or fire.

•

Unplug the power cord from the 
wall outlet before you move the 
machine. While moving the ma-
chine, you should take care that 
the power cord will not be dam-
aged under the machine.

•

When you disconnect the power 
plug from the wall outlet, always 
pull the plug (not the cable).

2

1

3

4

RuC4_EN_gsg-F_FM_forPaper.book  Page 146  Tuesday, April 5, 2005  12:06 PM

Содержание LD225

























































































































































































Отзывы:

Нет отзывов