Lanier LD225, Руководство по настройкам, Страница: 36 / 184

Getting Started
24
1
9. {
Interrupt
}
key (copier/scanner
mode)
Press to make interrupt copies during
copying or scanning. See “Interrupt
Copy”,
Copy Reference .
10.
Main power indicator and On
indicator
The main power indicator goes on when
you turn on the main power switch.
The On indicator lights when the power
is on.
Important
❒
Do not turn off the main power
switch while the power indicator is
lit or blinking. Doing so may dam-
age the hard disk.
11.
Operation switch
Press to turn the power on (the On indi-
cator goes on). To turn the power off,
press again (the
On indicator goes off).
12. {
Sample Copy
}
key
Press to make a single set of copies or
prints to check print quality before mak-
ing multiple sets.
13. {
Start
}
key
Press to start copying. Start scanning or
printing documents stored using the
Document Server function.
14. {
Clear/Stop
}
key
• Clear
Press to delete a number entered.
• Stop
Press to stop a job in progress, such as
scanning, faxing, or printing.
15. {
#
}
key
Press to enter after a numerical value.
16.
Number keys
Use to enter the numbers for copies, fax
numbers and data for the selected func-
tion.
17. {
Start Manual RX
}
key,
{
On Hook Dial
}
key,
{
Pause/Redial
}
key, and
{
Tone
}
key
Reference
Facsimile Reference <Basic Features>
and Facsimile Reference <Advanced
Features>
18.
Function keys
Press to select one of the following func-
tions:
• Copy
• Document Server
• Facsimile
• Printer
• Scanner
19.
Function status indicators.
These show the status of the above func-
tions:
• Yellow: selected.
• Green: active.
• Red: interrupted.
RuC4_EN_gsg-F_FM_forPaper.book Page 24 Tuesday, April 5, 2005 12:06 PM