Installa
�
on of the
crank unit
1.
Remove the spool
from the crank unit
using 11/16 and
9/16 sockets.
2.
Cut one sec
�
on of
2x6 to roughly 20
inches. Mount it to
your back wall using
at least 4 screws
(HAT-050). You
will want this at
comfortable
working height,
approximately
50-inches above the
floor.
3.
Mount your crank
unit to the 2x6,
centered with your
hardtop, using both
3" lag screws and
washers (HAT-054
& HAC-023)
provided.
Call toll free 1866 284 7428
langeoriginals.com copyright
lange originals 2017
