Lang ECOF-C-CN, Инструкции по установке, эксплуатации и обслуживанию

Страница: 15 / 31

UL FILE # E8138 15
Programming
Pace Timers
The pace timers can be set at any time. Press and hold the “PACE” button for three seconds.
The display will read out the set time then begin to flash. Press the “1” minute button to
increase the time, or the “2” minute button to decrease the time. Once the corrected time is
set, press and hold the “PACE” button for three seconds to exit the programming mode.
Program Enable Buttons
The control cannot be put into the programming mode if any of the timers are running. The
two blue dots above the “CINNABON” logo are the program enable buttons. Press the left
dot then the right dot within 3 seconds to put the control into a programming mode. Once the
shelf position buttons are set, press the left dot then the right dot within 3 seconds to exit the
programming mode. There will be no beeper sound when the buttons are pressed.
Shelf Position Buttons
Put the control into the programming mode. Press the shelf button to be adjusted once for “C”
product, twice for “P” product, or three times for “E” product. The display will read out “00:00”
then begin to flash. Press the one-minute timer button to increase the time, or the two-minute
timer button to decrease the time. Once the correct time is set move on to another shelf
position button or exit the programming mode.