Lang ECCO-AP, Руководство по обслуживанию

Страница: 19 / 73

18
PROGRAMMING ECCO-PP
ACTION DISPLAY
Turn the power switch on. If the oven is already on, press
the Read / Clear key until the following screen is
displayed.
SELECT PRODUCT OR
READ/CLEAR TO
PROGRAM
XX:XXPM XXXF
Enter access code “ 1 6 2 7 3 8”.
A: SET TIME
B: SET DATE
C: PROGRAM PRODUCTS
D: NEXT MENU
Select “C”.
PRODUCT PROGRAM MODE
SELECT PRODUCT
NUMBER 0-9
Select a number from 0-9 and press the key corresponding
to that number.
ENTER COOKING TEMP
100 TO 450 F
NOX T1 XXXF
If a product Key selected already has a program, the screen
will read.
EDIT PRODUCT?
1=EDIT OR 2=DELETE
NXX TX XXXF CX
XX:XX:XX PXXX F-XX
Enter a desired cooking / baking temperature. The screen
will automatically advance to the next display.
ENTER COOKING TIME
HR:MIN:SEC
NOX T1 XXXF CO
Enter the cooking time and then press “E” to advance to
the next screen.
ENTER COOKING CURVE
0 TO 100%
NOX T1 XXXF CXX
XX:XX:XX PXXX F-XX
Enter the desired cooking curve. (Refer to sections 6.3 and
6.7 for more detail)
ENTER FAN SPEED
1=HI 2=LOW
NOX T1 XXXF CXX
XX:XX:XX PXXX F-XX
Select Fan speed. (Hi=1700 rpm, Low=1400)
ENTER FAN PULSE RATE
1 TO 100%
NOX T1 XXXF CXX
XX:XX:XX PXX F-XX
Select Fan Pulse rate. (0 to 100%). 0=off unless calling for
heat. 100=on at all time.
NOTE: Any number between 0-100 means that the fan
will be on that many number of seconds in a 100-second
block. (E.g. 67%= on for 67 seconds in a 100 second
block)
CONTINUE TO TIER 2
1=YES 2=NO
NOX T1 XXXF CXX
XX:XX:XX PXXX F-XX
If your press 1 you will go through the same sequence as
outlined above. If you press 2 the next display will
automatically appear.
A: SET TIME
B: SET DATE
C: PROGRAM PRODUCTS
D: NEXT MENU