background image

Содержание SCO-2433

Страница 1: ...t breaker with approved rating 0 3 All connections made in accordance with local and or National Electrical Code OPERATIONAL 0 1 Oven racks installed and slide freely ir all positions 0 2 Knobs securely in place and rotate fre ly without rubbing edges of control panel glass holes 0 3 All lights function properly 0 4 Clock timer buzzer operates 0 5 Doors properly adjusted open and clcse smoothly 0 ...

Страница 2: ...to support the oven The front of the cabinet must be at right angles to the supports as well as level If the oven is not installed level it will not cook properly 24 to inslde of cabinet back A 31 to top of oven support I 24 to inside of cabinet back 1 r to top of oven support 36 9 MIN to lower cab doors 61 MI N 2 MIN to upper cab doors A MIN t 8 I Junction Box r Furnished by L j _ 7 Ins1 taller B...

Страница 3: ...bot om of the front frame Prior to installation test the electrical service to assure that it agrees with the specifications on the oven data plate Remove all cords tape and wire used to hold various p3rts in position during shipment Remove oven racks from the inide of the oven and put to one side while oven is being insta led in cabinet Take broiler pan and grid from packing on top If the oven an...

Страница 4: ... cabinet with 8 screws provided Do not over tighten screws Edge of front frame should be parallel to cabinet Disregard any excess screws that are left after all screw holes in front frame have been used I B Replace Oven Racks in Oven Cavity C Reinstall The Door s See Fig 1 1 Slide door hinge arms until firmly seated 2 Lower door to full open position 3 Push finger tabs to back Depress the tabs and...

Отзывы: