background image

 

6

 

UNPACKING 

3.1 Receiving the Griddle 

Upon receipt, check for freight damage, both visible and concealed.  Visible 
damage should be noted on the freight bill at the time of delivery and signed by the 
carrier's agent.  Concealed loss or damage means loss or damage which does not 
become apparent until the merchandise has been unpacked.  If concealed loss or 
damage is discovered upon unpacking, make a written request for inspection by the 
carrier's agent within 15 days of delivery.  All packing material should be kept for 
inspection.  Do not return damaged merchandise to Star Manufacturing 
International.  File your claim with the carrier. 

3.2 Location 

Prior to un-crating, move the griddle as near its intended location as practical.  The 
crating will help protect the unit from the physical damage normally associated 
with moving it through hallways and doorways. 

3.3 Un-crating 

The griddle will arrive completely assembled inside a wood frame covered by 
cardboard box and strapped to a skid.  

Remove the cardboard cover, cut the 

straps and remove the wood frame.   

Remove griddle from skid and place in intended location. 

CAUTION:

 

GRIDDLE IS EXTREMELY HEAVY.  FOR SAFE 
HANDLING, INSTALLER SHOULD OBTAIN HELP AS 
NEEDED, OR EMPLOY APPROPRIATE MATERIALS 
HANDLING EQUIPMENT (SUCH AS A FORKLIFT, 
DOLLY, OR PALLET JACK) TO REMOVE THE UNIT 
FROM THE SKID AND MOVE IT TO THE PLACE OF 
INSTALLATION.

 

CAUTION:

 

ANY STAND, COUNTER OR OTHER DEVICE ON WHICH 
GRIDDLE WILL BE LOCATED MUST BE DESIGNED TO 
SUPPORT THE WEIGHT OF THE GRIDDLE.

 

CAUTION: 

SHIPPING STRAPS ARE UNDER TENSION AND CAN 
SNAP BACK WHEN CUT. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание CL36GF
















Отзывы: