L&W SC-180 ES, Руководство по эксплуатации

Страница: 45 / 87

Seite A - 43
A
LW SC-180 ES / LW SC-250 ES
Version: 09.12.2022
M A I N T E N A N C E A N D S E R V I C E
Motor Type Initial Installation Operation after running in
Electric motors 50Hz 500 N 400 N
Electric motors 60Hz 400 N 300 N
Settings
Tension V-belt
Tension V-belt as follows:
• Loosen mounting screws (Fig. 1)
• Tighten V-belt by the lock nuts (Fig. 2 & 3)
• Tighten mounting screws (Fig. 1)
ATTENTION:
Motor plate (A) and motor (B) must be mounted in parallel (Fig.
4)
Correct V-belt tension
Do not tension V-belts too tight. This damages bearings of compressor and motor. The V-belts
should only be tensioned until there is no noise caused by slipping during start.
Fig. 1 - Loosen mounting screws
Fig. 4 - Motor plate and motor must
be mounted in parallel Fig. 2 - Tighten V-belt by the lock
nut Fig. 3 - Tighten V-belt by the lock
nut
A.
B.