landscape structures PlayBooster Pod Climber 156916, Руководство пользователя

Страница: 116 / 124

Specifications are subject to change without notice.
PlayBooster
®
185852 Transfer Step,
w/Handloops
Parts List
Part# Description Qty.
149024-00 Transfer Step, Specify Color .................................... 1
181342-00 Transfer Step, Support (DB), Specify Color ........... 1
181343-00 Transfer Step,Mounting Plate (SM), Specify Color 1
105327-01 5" Half Clamp, Specify Color .................................. 4
113729-00 Offset Hanger Clamp, Specify Color ....................... 4
108542-00 Handloop, Specify Color ........................................... 2
125741-00 Transfer Step Leg Hardware Package (DB) ....... 1
100198-00
3
/
8
" x 1
1
/
8
" BHCS w/Pin, SST .................................. 4
100327-00
3
/
8
" Standard Hex Nut, SST ...................................... 4
100365-00 3 /
8
" SAE Flat Washer, SST ........................................ 8
125740-00 Transfer Step Leg Hardware Package (SM) ...... 1
100198-00
3
/
8
" x 1
1
/
8
" BHCS w/Pin, SST .................................. 4
100263-00
3
/
8
" x 2
3
/
4
" Expansion Anchor .................................. 2
100327-00 3 /
8
" Standard Hex Nut, SST ...................................... 6
100365-00
3
/
8
" SAE Flat Washer, SST ....................................... 10
127148-00 Transfer Step Hardware Package ......................... 1
100198-00
3
/
8
" x 1
1
/
8
" BHCS w/Pin, SST .................................. 4
100365-00 3 /
8
" SAE Flat Washer, SST ........................................ 8
100327-00
3
/
8
" Standard Hex Nut, SST ...................................... 4
114309-00 Handloop/Rail Hardware Package ...................... 2
100198-00
3
/
8
" x 1
1
/
8
" BHCS w/Pin, SST ................................... 8
100203-00 5 /
8
" x 2 1 /
4
" BHCS w/Pin, SST ................................... 4
100351-00
3
/
8
" Tee Nut, SST ........................................................ 8
100610-00 1 /
4
" x 5 /
8
" Drive Rivet, SST ....................................... 4
DB = Direct Bury
SM = Surface Mount
Specifications
Step: Formed from 12 GA (.105") sheet steel conforming to
ASTM A1011. Finish: TenderTuff
TM
, color specified.
Step Support: Weldment comprised of 1.660 O.D. RS20 (.080"-.095)
and 1
3
/
4
" x 1
3
/
4
" x
1
/
8
" HR angle. Finish: ProShield
®
,
color specified.
Handloop: Weldment comprised of 1.125" O.D. 11 GA (.120")
steel tubing with 203 or 303 stainless steel inserts, with
5
/
8
" internal thread. Finish: TenderTuff, color speci-
fied.
Clamps: Cast aluminum. Finish: ProShield ® , color specified.
Fasteners: Primary fasteners shall be socketed and pinned
tamperproof in design, stainless steel (SST) per ASTM
F 879 unless otherwise indicated (see specific prod-
uct installation/specifications).
Installation Time: Approx. 1 1 /
2
man hours
Concrete Req.: DB - 1.16 cu. ft.
Weight: SM - 69 lbs.
DB - 77 lbs.
Installation Instructions
Direct Bury
1) Dig footings spaced as shown.
2) Mark locations of clamps on posts per dimensions on front of sheet.
3) Attach offset hanger clamps to ends of handloops using
5
/
8
" x 2
1
/
4
"
BHCS w/pin.
4) Position handloops with offset hanger clamps on marked positions
on posts and attach using 5" half clamps and
3
/
8
" x 1
1
/
8
" BHCS w/pin
with
3
/
8
" tee nuts. Refer to the Typical Offset Hanger Clamp Assem-
bly Sheet.
5) Install drive rivets in half clamps per the Typical Offset Hanger Clamp
Assembly Sheet.
6) Attach transfer step support to transfer step using 3 /
8
" x 1 1 /
8
" BHCS w/
pin with 3 /
8
" SAE flat washers and 3 /
8
" standard hex nuts with 3 /
8
" SAE
flat washers.
7) Attach transfer step to deck using 3 /
8
" x 1 1 /
8
" BHCS w/pin with 3 /
8
" SAE
flat washers and
3
/
8
" standard hex nuts with
3
/
8
" SAE flat washers as
shown.
8) With deck and steps in level position, pour concrete footings. Allow
concrete to cure for a minimum of 72 hours before users are allowed
to play on the structure.
9) Install protective surfacing before users are allowed to play on the
structure.
Surface Mount
1) Mark locations of clamps on posts per dimensions on front of sheet.
2) Attach offset hanger clamps to ends of handloops using 5 /
8
" x 2 1 /
4
"
BHCS w/pin.
3) Position handloops with offset hanger clamps on marked positions
on posts and attach using 5" half clamps and
3
/
8
" x 1
1
/
8
" BHCS w/pin
with
3
/
8
" tee nuts. Refer to the Typical Offset Hanger Clamp Assem-
bly Sheet.
4) Install drive rivets in half clamps per the Typical Offset Hanger Clamp
Assembly Sheet.
5) Attach transfer step mounting plate to transfer step using
3
/
8
" x 1
1
/
8
"
BHCS w/pin with
3
/
8
" SAE flat washers and
3
/
8
" standard hex nuts
with 3 /
8
" SAE flat washers.
6) Attach transfer step to deck using
3
/
8
" x 1
1
/
8
" BHCS w/pin with
3
/
8
" SAE
flat washers and 3 /
8
" standard hex nuts with 3 /
8
" SAE flat washers as
shown.
7) Mark holes for expansion anchors on concrete slab through step
mounting plate.
8) Detach step from deck and drill 3 /
8
" x 3" deep holes into concrete on
marks using 3 /
8
" masonry bit and hammer drill.
9) Reattach transfer step to deck.
10) With step over drilled holes, tap expansion anchors into drilled holes.
Secure using 3 /
8
" standard hex nuts with 3 /
8
" SAE flat washers.
11) Install protective surfacing before users are allowed to play on the
structure.
J:\SPECS\185\18576400.P65
ECO 54590 Created new model number and added handloops to Parts List.