landscape structures PlayBooster Pod Climber 156916, Руководство пользователя, Страница: 108 / 124

Specifications are subject to change without notice.
PlayBooster
®
122197 90
O
Triangular Tenderdeck
J:\SPECS\145\14582500.P65
Parts List
Part# Description Qty.
145658-00 90 o Tri-Deck, Specify Color ..................................... 1
105327-01 5" Half Clamp, Specify Color .................................. 3
106022-00 Deck Hanger Clamp, Specify Color ........................ 3
120203-00 Triangular Deck Hardware Package ................... 1
100198-00 3 /
8
" x 1 1 /
8
" BHCS w/Pin, SST .................................. 6
100321-00
3
/
8
" Hex Patch Nut, SST ............................................ 3
100351-00 3 /
8
" Tee Nut, SST ........................................................ 6
100362-00
3
/
8
" Flat Washer, SST ................................................. 3
100610-00
1
/
4
" x
5
/
8
" Drive Rivet, AL/SST ................................. 3
Specifications
Triangular Deck: Flange formed from 12 GA (.105") sheet steel con-
forming to ASTM A1011. Standing surface is perfo-
rated with
5
/
16
" diameter holes. Deck face has (4) slot-
ted holes for face mounting components. The finished
size measures 2
5 /
8
" x 37 3 /
4
". Finish: TenderTuff TM ,
color specified.
Deck Hanger
Clamp Assembly: Cast aluminum. Finish: ProShield ® , color specified.
Fasteners: Primary fasteners shall be socketed and pinned
tamperproof in design, stainless steel (SST) per ASTM
F 879 unless otherwise indicated (see specific prod-
uct installation/specifications).
Installation Time: Approx.
1
/
2
man hour
Weight: 67 lbs.
Installation Instructions
1) Mark posts for the appropriate height of the deck you are installing.
2) Fasten deck hanger clamps to marked position on posts. See Detail
on front of sheet.
3) Lift deck assembly into position, lining up stud underneath deck with
deck hanger clamp as shown. Attach using
3
/
8
" hex patch nuts with
3
/
8
"
flat washers. With deck level and posts plumb, final tighten all hard-
ware.
4) Install
1
/
4
" x
5
/
8
" drive rivets in all 5" half clamps. Refer to the Typical
Offset Hanger Clamp Spec Sheet.
5) After attachment of enclosures and components is complete, pour
concrete footings. Allow concrete footings to cure a minimum of 72
hours before users are allowed to play on the structure.
6) Install protective surfacing before users are allowed to play on the
structure.
Eco #52268 Document #14582500 replaces #13973400. Replaced 90
o
Tri-Deck.