Landoll Coulter Chisel 2112, Руководство оператора

Страница: 86 / 108

3-48 F-1102-0721
ASSEMBLY INSTRUCTIONS
Figure 3-37: 1,200 Foot-Pounds of Torque
Final Assembly
1. Attach a tractor to the implement and charge the lift
system hydraulics as described in
“Hydraulic Lift
System” on page 4-3 .
2. Install the 2 x 16 transport lockouts on both 4 x 16
cylinders on the center frame.
3. Connect lights to the tractor and verify operation.
4. Check tires for proper inflation
5. Level the Wing Coulter Chisel from front to rear as
described in
“Leveling (Front-to-Rear)” on
page 4-5 .
6. Inspect the final implement assembly, and verify that
all bolts have been tightened, cotter pins spread, and
that there are no leaking hydraulic connections.

CAUTION
7. Rotate each coulter gang to verify that each gang
rotates freely. Adjust any scrapers that may have
shifted during shipment or assembly.
8. Lubricate the Wing Coulter Chisel at all locations as
described in
“Lubrication Maintenance” on
page 4-11 .
9. Touch up with paint any areas that may have been
scratched during moving, handling, or assembly.
10. Thoroughly read and understand the operating
section before using the Coulter Chisel.
300
POUNDS
PULL
4 FOOT
Tighten all 1-3/4” nuts to 1,250 foot-pounds of
torque (
See Figure 3-37 )