Landoll Brillion 4630-36 Series, Руководство оператора

Страница: 37 / 40

5-1
Chapter 5
Troubleshooting Guide
For any questions concerning operation or maintenance
of the seeders, refer to the operator’s and parts manuals
as designated in “AVAILABLE SEEDER OPTIONS” on
page 2-1.
Troubleshooting Guide
PROBLEM PROBLEM CAUSE SOLUTION
Power LED does not
illuminate
Power fuse blown due to system fault Inspect wire harness for damage or shorts
Replace 15 Amp fuse
Power fuse blown due to tractor fault Check the power source is 12 Volts DC
Polarity reversed at power lead
connection
Swap power leads to correct terminal
Monitor console fault Replace or repair console
All indicator LEDs do not
illuminate
Harness disconnected at hitch,
extension or sensors
Check all connections
Harness fuse blown Inspect wire harness for damage or shorts
Replace 15 Amp fuse
One indicator never
illuminates
Sensor not connected Check sensor lead
Harness damaged Check continuity of harness
Sensor failed Swap sensor from another seed box and
test
No indicator ever
extinguishes
Shafts are not turning Check seeder drive system
Sensors not correctly installed Check 1/8 inch gap at sensors
One indicator never
extinguishes
Shaft is not turning Check section drive system
Seed shaft sensor out of magnet range Check for 1/8 inch gap at sensors