Landoll Brillion 4630-36 Series, Руководство оператора

Страница: 20 / 40

4-2 F-640-0615 Edition
OPERATION AND MAINTENANCE
Tractor Preparation
The Landoll 4630-36 Folding Seeder is designed to be
pulled by tractor equipped with a double lip or clevis type
hitch. If your tractor is not equipped as such, you need to
purchase the hitch from your local tractor dealer.
Before attaching the Seeder Hitch, prepare the tractor as
follows:
1. Check the Tractor tire inflation levels to ensure that
they are properly inflated. Refer to the Tractor
Operator's Manual. Be sure not to over ballast and
exceed Tractor Tire Capacity.
2. Lock the tractor drawbar in the center position.
Seeder Hitch Preparation
1. Prior to operating the 4630-36 Folding Seeder, read
and understand the operator's manual and all decals.
2. Inspect the machine thoroughly for good operating
condition.
3. Replace worn or missing parts.
4. When the machine is new, check the bolt tightness
after a few hours of operation. Tighten any loose nuts
or bolts. Check the lift wheel lug bolts daily.
5. Check the lift wheel tire inflation. Inflate all tires
equally to avoid side draft. Follow the tire
manufacturer’s recommended pressures listed on the
sidewall of the tires.
6. Lubricate the machine. (See “Lubrication
Maintenance” on page 4-18 and Figure 4-13 on
page 4-17).
7. Check that all safety decals and reflectors are
correctly located and legible. Replace if damaged.