Landoll 330C, Руководство оператора

Страница: 55 / 64

TROUBLESHOOTING GUIDE
5-3
BENDING OR WARPING Curb-hopping or potholes Adjust turning practices and adjust speed
accordingly with road conditions.
Improper tightening sequence Follow proper tightening sequence (See
Figure 4-17.)
BROKEN STUDS* Over tightening Use correct torque when mounting (See
“Standard Specifications” on
page 2-1.)
*REPLACE BROKEN STUDS BEFORE USING THE SEMITRAILER!
SEMITRAILER TRACKING PROBLEMS:
TRACKS TO ONE SIDE Axle alignment Realign axle (See “Axle Alignment” on
page 4-14.)
TRACKS TO EITHER SIDE Broken or bent springs or equalizers Replace defective parts.
Axles not parallel Realign axles
AIR RIDE HEIGHT PROBLEMS:
TOO HIGH Axle to control valve linkage Readjust linkage.
Height Control Valve internal leak Repair or replace valve.
TOO LOW Axle to control valve linkage Readjust linkage.
Height Control Valve filter plugged Clean or replace valve.
Pressure Protection Valve filter plugged Clean or replace valve.
System air pressure low (65 PSI minimum
required) Troubleshoot air supply.
UNEVEN FROM SIDE TO SIDE Linkage adjustment Readjust linkage
Exhaust port plugged Clean or replace valve(s).
Height control valve internal leak Repair or replace valve.
Supply line to one height control valve
pinched, restricted, or plugged Repair or replace line.
PROBLEM PROBABLE CAUSE SOLUTION