Landoll 330C, Руководство оператора

Страница: 44 / 64

4-18 F-475-0611 Edition
MAINTENANCE AND LUBRICATION
Brake Assembly Maintenance
The brake assemblies should be inspected and adjusted
every 2,000 miles or monthly. Examine the brake linings
visually to locate the lining showing the greatest amount
of wear. The wheel and drum should be removed and the
linings replaced if the thinnest portion of the lining is 3/8
in. (9.5 mm) or less. Do not allow the linings to wear thin
enough that the lining rivet contacts the drum
(See
Figure 4-10.)

WARNING
Figure 4-10: Brake Lining Wear
Figure 4-11: Checking Brake Adjustment
Do not allow grease to contact brake linings as
this could result in reduced braking performance.
D2 - D1 = 1-3/4” MAX
D1 = FULLY RELEASED
D2 = FULLY APPLIED
D2
D1
CONNECTING ROD
CLEVIS OR LINKAGE
SLACK ADJUSTER
ADJUSTING NUT
CAM SHAFT
gunite