14
LANDMANN
15
18
15
18
17
17a
17b
16
19
S
17
17
24. First push the gas hose (17a) from the adjusment unit
(17) into the opening in the burner hose (18). Then
push the adjustment bolt (17b) through the opening
in the side burner table (15).
Screw the flame regulator (17) from the front to the flame
regulator cover (16) using the two crosshead screws
(S).
Please note that „OFF“ should be at the top on the
cover, and that the gas hose must not be bent or
twisted.
25. Fit the flame regulator button (19) onto the adjusment
unit (17).
26. Position the side burner (18) as shown in the
illustration.
27. Screw the side burner (15) to the rear bar with two
screws (S).
28. Fit the clamp (B) onto the front bar of the side burner
casing, also using two screws (S).
15
A
20
21
22
29. Fit the five ignition hoses into the connections on the
ignition button (any position, see detailed illustration
A).
30. Unscrew the ignition button caps (20), insert an AA
battery (minus pole first), and then carefully screw
the cap back into place.
31. Place the brass burner insert (21) onto the burner.
32. Also fit the side burner insert (22) onto the burner.
Position the three longer legs into the drill holes in the
side burner table.
8
23
7
33. Place the drip tray (23) into the hole in the heat plate
(8). Place its handle onto the groove in the rear cross
bar (7).