19
Assembly step 5
H
H
2
1
A
A
•
Stand the grill unit on its end so the opening for
the firebox is at the top. Place the fire box (1) on
the smoking chamber (2) and bring the holes into
alignment. Fasten the fire box to the smoking
chamber using six hex head bolts M6x15 (A),
six M6 washers, and six M6 nuts (H). Completely
tighten ALL nuts and bolts. Do not overtighten.
Assembly step 6
A
A
12
H
H
11
•
Place the grill upright on legs and wheels. Attach
the shutter (11) to the rear of the fire box end
door. Adjust the shutter so that pin of the damper
slides through the opening in the floor of the door.
Use a hex head bolt M6x15 (A), one M6 washer
outside and one M6 washer inside, as well as a
M6 (H) nut to fix in place on the inside. Tighten
slightly so that the shutter can be moved easily
and remains in place when opening and closing.
Attach the fire box handle (12) using a hex head
M6x15 bolt (A), and two M6 washers and two
M6 nuts (H). Introduce the hex head M6x15 bolt
(A) through the handle and use a washer on the
burner door. Slide the bolt through the burner
door and fasten it using a washer and two M6
nuts (H). Tighten the nuts so that the handle can
still be moved. Tighten the two nuts counter to
each other and prevent them from coming loose.
Assembly step 7
15
•
Attach the smokestack (15) to the smoking
chamber by inserting the stud bolts of the
smokestack into the corresponding holes of the
smoking chamber. Ensure that the smokestack
is pointing upward. Fix the smokestack in place
using two M6 washers and two M6 nuts. Tighten
the nuts.
