Alerts and Notifications
Issue: 0.4
Page 81 of 90
P450 In Home Energy Monitor - DRAFT User Manual Commercial in Confidence. © Gyr
© Gyr
An example of the No response received screen can be seen in the following image.
Figure 110 Cannot Establish Communication Screen
Selecting the Admin button will direct the user to the code entry screen where the user will be asked
to enter a 4-digit code to unbind the P450 IHEM from the meter. The operation of the Code entry
screen is detailed in section 13.3.3.
16.2.3 Low battery notification
The Low Battery notification will be shown when the P450 IHEM is operating on battery power and the
remaining battery power level falls below 10% of its remaining life. If this notification is seen, then the
user should fit new batteries to the P450 IHEM.
The low battery screen can be seen in the following example.
Figure 111 Low Battery Notification Screen
16.2.4 Power up notification
When the P450 IHEM is powered up; as part of the power up process a notification screen will be
displayed showing the Utility Supplier details. The screen will only be displayed for a few seconds
before the power up sequence is completed.
The power up screen can be seen in the following example.
Figure 112 Power up Notification Screen
