32/52
Operation
© Gyr
D000030875 en q
– E350 series 2, 1-phase ZCF100Ax/Cx – User Manual
+P
+Q
L
1
k
h
+P
+Q
L
1
k
arh
-P
+P
-Q
+Q
L
1
L
2
L
3
V
k
GJ
MJ
m
3
A
arh
+P
+Q
L
1
k
h
+P
+Q
L
1
k
arh
etc.
The meter first shows the total
active energy import register as
00123.4 kWh, followed by the
reactive energy import register as
00009.6 kVarh and all segments on
and then all off. The display dura-
tion for each display can be set
between 1 and 15 seconds, but not
individually. This sequence is re-
peated until the meter is switched
off or the recall list (short press of
the display button) or the service
display (long press of the display
button) is entered.
5.2.6
Display Check
During the display check, the first test item shows the display with all
segments switched on. Especially the index and value fields should be
checked for missing segments. The second display test item shows the
display with all segments switched off.
-P
+P
-Q
+Q
L
1
L
2
L
3
V
k
GJ
MJ
m
3
A
arh
Third display test item: The display check may also be configured to flash
the display on and off at a rate of one cycle per second.
5.2.7
Error Display
An error display can be included in a display sequence, but it also automati-
cally turns up in case of a malfunction. The error code is based on a 32 bit
value in which each bit, if set, indicates a particular error condition. In the
following error display the error code "00002002" is composed of the two
errors "00000002" and "00002000".
+P
+Q
L
1
The error codes are described in section 6.2.2 "Error Code Descriptions".
