Landice M1, Руководство по обслуживанию

Страница: 9 / 26

1 800 - LANDICE | SERVICE@LANDICE.COM | WWW.LANDICE.COM
Using Your Multimeter
A Multimeter is a device used to measure a variety of electrical functions. The
multimeter best suited to diagnosing a treadmill will be able to measure AC
and DC voltage, as well as Ohms and electrical continuity.
Make sure the batteries in your
Multimeter are fresh before you begin!
Vac – Alternating Current
reverses polarity
from plus (+) to minus (-). For the M1
Treadmill, you can test Vac coming from the
outlet into the unit.
Vdc – Direct Current
only flows in one
direction, and provides a constant voltage over
time.
Ohms –
The electrical resistance of a
component or conductor measured in ohms.
You can check the condition of a drive motor
ohm.
Continuity – Electrical Continuity
is the
continuous, uninterrupted flow of electricity.
You will use continuity to check fuses, wire
harnesses, power cord and pins for any
interruption. You can also use it to perform a
membrane bypass test (where applicable).