1 800 - LANDICE | [email protected] | WWW.LANDICE.COM
Drive Motor Replacement
TOOLS NEEDED:
●
3mm and 4mm Allen Head Wrench
UNPLUG UNIT BEFORE STARTING
Begin by folding then leaning the
treadmill up against a surface for easy
access to the motor cover. Using a
3mm
Allen Wrench, you will remove
11 bolts
in total:
7
on the bottom of the pan, and
2
on each wheel. Remove wheel plate on
each side, allowing you to remove the
cover.
Using a
4mm
Allen Wrench, remove the
4 bolts
keeping the wheel and drive belt pulley in place.
(Fig A)
Remove the wheel plate from the unit.
(Fig B)
Then, carefully work the drive belt off the drive motor.
(Fig C)
Using a 4mm Allen Wrench, remove the 4 remaining bolts from the drive motor.
(Fig A)
Remove the black and red wires from the lower circuit board.
(Fig B)
Now you can remove the drive motor. Reverse the directions to install.
Removing the Motor Cover
Содержание M1
