15.1.2
Sprint PCS
Sprint has not certified LF1009 Modules, please see the CDM-819s/u Manual for Modems using
the 1.2.04 and 1.2.06 Modules.
15.1.3
Bell Mobility (Canada)
15.1.3.1
Provisioning
Bell Mobility uses a manual process for provisioning their modems. The ESN is entered into their
database and an MDN and MIN number are assigned to the account. The MDN is the number that
is used to contact the modem and the MIN is an internal number that is used for cellular network
routing. Most of the times the numbers are the same, however at times the numbers could be
different. It is very important to program these numbers correctly because if they are reversed the
modem will not work correctly. The MIN is automatically loaded with the MDN number so the
MDN must be entered first.
If the MSID number is different from the MDN you may have to
contact Land-Cellular to program this value.
You must the enter the Activation code. To test it
make a call with the modem to your cell phone.
AT$KWMODE=1
AT$KWSPC=000000
AT$KWDIR=
10-Digit (MDN) Directory Phone Number From Cellular Carrier (Without
Hyphens)
AT$KWMODE=2
AT+CDV*2355
This activates the modem on the Bell Mobility
Network
AT+CDV<Cell Phone Number>
Call your cell phone to test that it activated,
when it rings, confirm the number matches,
answer and then hang-up to disconnect the call.
(Do not enter the angle brackets, just the cell
phone number with no spaces.)
15.1.3.2
1xRTT Connections (Username and Password)
Dial:
#777
Username:
[email protected] (example: [email protected])
Password:
4-digit Voice Mail password from Customer Service (example: '0123')
