15.1.1.2
United States Verizon Subscriber Settings
NOTE: The following applies to Verizon Wireless subscribers residing in the United States who
have communication between the computer and the modem, but cannot place inbound or
outbound calls through the cellular network.
If you are a Verizon Wireless subscriber residing in the United States, the standard procedure to
have the modem provisioned is by issuing the command
AT+CDV*22899
. If the modem will not
provision and you have verified with Verizon that the serial number is activated in their systems,
you may have to manually key in the phone number. In cellular terminology, the phone number is
known as the Mobile Directory Number (MDN), the number you call to connect to the modem
and can be entered as described below.
If the MSID number is different from the MDN and
OTAPA failed you may have to contact Land-Cellular to program this value.
Enter these
commands via your terminal emulation software:
AT+GMR
(
Note the PRL Number
)
AT$KWMODE=1
AT$KWSPC=000000
AT$KWDIR=
10-Digit MDN Phone Number From Verizon (Without Hyphens)
AT$KWMODE=2
AT+CDV*22899
After issuing the last command listed above, let the modem sit uninterrupted for four minutes.
After four minutes, remove the power supply jack from the modem and reinsert it several seconds
later. Reconnect via terminal emulation and query the unit with these commands:
AT$KWMODE?
AT$KWDIR?
AT+GMR
AT+CDV<Cell Phone Number>
Call your cell phone to test that it activated,
when it rings, confirm the number matches,
answer and then hang-up to disconnect the call.
(Do not enter the angle brackets, just the cell
phone number with no spaces.)
The first command should return the number
0
as a reply, the second should return your modem’s
phone number. The third will print out the module firmware version, followed by the PRL
number loaded in by Verizon’s network, if different than before, OTASP has definitely occurred.
You may now test the functionality of the modem. For more information on
AT+CDV*22899
,
see section 4.1
Over-the-Air Provisioning
.
15.1.1.3
1xRTT Connections (Username and Password)
Simple IP
Dial:
#777
User Name:
i.e.
Password:
vzw
Mobile IP
Mobile IP is not supported on RF Modules with 1.0.09 firmware versions in the CDM-819s
modems.
