LANDA VHP • 8.913-949.0 • Rev. 5/13
OPERA
TOR’S MANU
AL
PRESSURE W
ASHER
10
assembly InsTruCTIons
sTep 1: Connect power cord to
proper electrical outlet according
to serial plate information. Push
in GFCI reset button. The VHP2-
15021D requires a 20 amp recep-
tacle.
sTep 2: Connect high pressure
hose to discharge nipple by slid-
ing quick coupler collar back. (If
detergent is to be applied, insert
a detergent injector.) Insert quick
coupler onto discharge nipple and
secure by pushing quick coupler
collar forward.
sTep 3: Attach the high pressure
hose to the spray gun using teflon
tape on hose threads. Move safety
latch into locked position.
sTep 4: Check oil level by using
supplied dip-stick. Use SAE 30W
non-detergent only.
Detergent
Injector
safety
latch
high
pressure
hose
spray
gun
high
pressure
hose
Discharge
nipple
Detergent
suction
Tube
sTep 5: Connect propane hose to
a propane tank.
propane
hose
sTep 1: sTop! Read operator’s manual
before operating this machine. Failure to
read operation and warning instructions may
result in personal injury or property damage.
Connect water supply hose to inlet connec-
tor and turn water on.
sTep 2: Turn all switches off. Remove and
position LP tank as far from machine as supply
hose will allow.
89139490-5
Turn pump/
burner
switch off
operaTIng InsTruCTIons
Содержание vhp2-1500
Страница 38: ...Form 8 913 949 0 Revised 5 13 Printed in U S A...