manualshive.com logo in svg
background image

8

Safety

WARNING: High pressure 
developed by these machines will 
cause personal injury or 
equipment damage. Keep clear of 
nozzle. Use caution when oper-
ating. Do not direct discharge 
stream at people, or severe injury 
or death will result. 

AVERTISSEMENT: La haute 
pression générée par ces 

machines causera des lésions corporelles ou des 
dommages à l'équipement. Se tenir à l'écart de la 
buse. Faire preuve de prudence lors de l'utilisation. 
Ne pas décharger directement le jet vers des 
personnes ou des animaux, car cela risquerait de 
causer des blessures graves ou même la mort.

WARNING: Protect machine from 
freezing.

AVERTISSEMENT: Protéger la 
machine contre le gel.

15. To keep machine in best 

operating conditions, it is 
important you protect machine 
from freezing. Failure to protect 
machine from freezing could 

cause malfunction of the machine and result in 
death, serious bodily injury, and/or property 
damage. Follow storage instructions specified in 
this manual.

16. Inlet water must be clean fresh water and no hotter 

then 90°F.

DANGER: Risk of asphyxiation. 
Use this product only in a well 
ventilated area. Running this 
product indoors can result in 
death due to carbon monoxide, a 
poisonous gas you cannot see or 
smell. Never operate indoors even 
if windows and doors are open. 
Only use outdoor and far away 
from windows, doors, and 

openings or vents.

DANGER: Risque d'asphyxie. Ne pas inhaler les 
vapeurs. Utiliser ce produit uniquement dans un 
endroit bien ventilé. L'utilisation de ce produit à 
l'intérieur peut causer la mort par monoxyde de 
carbone, un gaz toxique incolore etinodore. Ne 
jamais utiliser à l'intérieur, même si les fenêtres et 
les portes sont ouvertes.

17. Avoid installing machines in small areas or near 

exhaust fans. Adequate oxygen is needed for 
combustion or dangerous carbon monoxide will 
result.

18. Manufacturer will not be liable for any changes 

made to our standard machines or any compo-
nents not purchased from us.

19. The best insurance against an accident is precau-

tion and knowledge of the machine.

WARNING: Be extremely careful 
when using a ladder, scaffolding 
or any other relatively unstable 
location. The cleaning area 
should have adequate slopes and 
drainage to reduce the possibility 
of a fall due to slippery surfaces.

AVERTISSEMENT: Faire preuve 
d'une extrême prudence au 
moment d'utiliser une échelle, 

des échafaudages ou toute autre surface 
relativement instable. La zone de nettoyage doit 
avoir une pente et un drainage adéquats pour 
réduire la possibilité d'une chute due à une surface 
glissante.

20. Do not overreach or stand on unstable support. 

Keep good footing and balance at all times.

21. Do not operate this machine when fatigued or 

under the influence of alcohol, prescription medica-
tions, or drugs.

WARNING: Do not spray machine 
or any people, animals or elec-
trical parts.

AVERTISSEMENT: Ne pas 
vaporiser sur la machine ou les 
gens, les animaux ou les pièces 
électriques.

Follow the maintenance instructions 
specified in the manual.

Suivre les instructions d'entretien 
spécifiées dans le manuel.

Landa PHW Operator’s Manual   8.917-417.0 - D

WARNING

DO NOT SPRAY 

MACHINE OR ANY 

PEOPLE, ANIMALS OR 

ELECTRICAL PARTS.

WARNING

PROCTECT FROM

FREEZING

DANGER

RISK OF 

ASPHYXIATION. 

USE THIS PRODUCT 

ONLY IN A WELL 

VENTILATED AREA.

WARNING

RISK OF INJURY

FROM FALLS WHEN

USING LADDER.

WARNING

RISK OF INJECTION 

OR SEVERE INJURY

TO PERSONS. KEEP 

CLEAR OF NOZZLE.

Содержание PHW3-11024



























Отзывы: