Land Pride Rear Blades RBT4596, Руководство оператора

Страница: 21 / 38

Section 2: Set-Up of Accessories
RBT4596 & RBT45108 Rear Blades 301-205M 1/13/21
17
Table of Contents
Hydraulic Selector Valve
Kit Bundle
301-227A . . . . . . . . . . Double Selector Valve Assembly
Refer to Figure 2-4:
An optional hydraulic selector valve kit may be purchased
that bolts to the front hitch frame. This kit provides a way
to operate 2 cylinders at one outlet, thereby reducing the
number of required outlets at the tractor by one. See also
“Tractor Requirements” on page 9.
1. Remove existing two bolts (#4) and discard.
2. Attach selector mount (#9) to the top of the hitch with
two new 1/2"-13 x 2" GR5 hex head cap screws (#4),
flat washers (#5), spring lock washers (#6), and hex
nuts (#7). Tighten nuts to the correct torque.
3. Attach double selector valve (#3) to selector
mount (#9) with two 3/8"-16 x 3" GR5 hex head cap
screws (#8), spring lock washers (#10), and hex
nuts (#11). Tighten nuts to the correct torque.
Hydraulic Selector Valve Assembly
Figure 2-4
24998
Customer to supply Quick
Disconnect Couplings.
4. Apply teflon tape to the pipe threads of the three
3/4 x 1/2MNPT elbows (#1) and screw them into the
double selector valve as shown. Tighten to correct
orientation.
5. Apply teflon tape to the threads of the three
3/4JIC x 1/2MNPT adapters (#13) and screw them
into the double selector valve until tight.
6. Attach three 3/4JIC x 3/4JIC elbows (#12) to the
adapters (#13). Tighten to correct orientation.
7. Attach blade offset hydraulic hoses (#14) to the
bottom elbows.
8. Attach hydraulic hoses (#15) from one of the other
cylinders to the top elbows.
9. Attach tractor connected hydraulic hoses (#2) to the
side elbows.
10. Thread hydraulic adapters onto hydraulic hoses (#2)
and tighten. (Customer to supply quick disconnect
hydraulic couplings.)