Land Pride RCM3712, Руководство оператора

Страница: 49 / 64

Section 5: Maintenance & Lubrication
RC(M)3712 & RCG(M)3712 Rotary Cutters 334-203M 11/6/18
45
Table of Contents
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the cutter when storing it for long periods and when
storing it at the end of a working season. This will help
ensure the cuter is ready for field use the next time you
hook-up to it.
DANGER
!
To avoid serious injury or death:
• Always disconnect driveline from the tractor before
servicing the drivetrain and components powered by the
drivetrain. A person can become entangled in the drivetrain
if the tractor is started and the power take-off is engaged.
• Always secure equipment with solid, non-concrete supports
before working under it. Never go under equipment
supported by concrete blocks or hydraulics. Concrete can
break, hydraulic lines can burst, and/or hydraulic controls
can be actuated even when power to hydraulics is off.
1. Clean off any dirt and grease that may have
accumulated on the cutter and moving parts. Scrape
off compacted dirt from the bottom of deck and then
wash surface thoroughly with a garden hose. A
coating of oil or touch up paint may also be applied to
the lower deck area to minimize oxidation.
2. Check blades and blade bolts for wear and replace if
necessary. See “Cutter Blades” on page 42.
3. Inspect for loose, damaged, or worn parts and adjust
or replace as needed.
4. Repaint parts where paint is worn or scratched to
prevent rust. Ask your Land Pride dealer for aerosol
touch-up paint. Paint is also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
5. Replace all damaged or missing guarding & decals.
6. Lubricate as noted in “Lubrication Points” starting
on page 46.
7. Store cutter on a level surface in a clean, dry place.
Inside storage will reduce maintenance and make for
a longer cutter life.
8. Follow “Unhook Rotary Cutter” instructions on
page 24 when disconnecting tractor from cutter.
Land Pride Aerosol Touch-up Paint
Part No. Part Description
821-011C PAINT LP BEIGE SPRAY CAN
821-070C PAINT LP BLACK SPRAY CAN
821-054C PAINT MEDIUM RED SPRAY CAN
821-058C PAINT GREEN SPRAY CAN
821-066C PAINT ORANGE SPRAY CAN
821-080C PAINT GALVANIZED SPRAY CAN
Ordering Replacement Parts
Land Pride offers equipment in factory standard Beige
and factory standard Galvanized with black highlights.
This implement may also be purchased in Orange,
Green, Yellow or Red.
When ordering an optional color, the suffix number
corresponding to the color must be added at the end of
the part number. Parts ordered without the suffix number
will be supplied in factory standard colors.
For example, if you are ordering a replacement part with
part number 555-555C and the existing part is orange,
then add the suffix 82 to the end of the number to make
the part number read 555-555C82.
81 . . . . . . . Green
82 . . . . . . . Orange
83 . . . . . . . Red 85 . . . . . . . Black
86 . . . . . . . Yellow