Introduction
RCF3096, RCF3010, & RCFM3010 Rotary Cutters 326-566M
11/8/18
9
Introduction
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1.
Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
35040
Land Pride welcomes you to the growing family of new
product owners. This Rotary Cutter has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this product.
Application
The heavy duty RCF3096 and RCF(M)3010 Series
Rotary Cutters are designed and built by Land Pride to
provide excellent cutting performance on gently sloping
or slightly contoured right-of-ways, pastures, set-aside-
acres, or row crop fields. Their 8 or 10 foot cutting width,
2" to 12" cutting height, and ability to cut weeds and
brush up to 2 1/2" in diameter make them well suited for
these applications. They offer Quick Hitch adaptability
with either 540 or 1000 rpm power take-off capability.
The RCF3096 cutters are designed for Category
l or ll 3-point and semi-mount hitches or pull-type
attachment with 3-point requiring a 50 - 110 hp tractor
while semi-mount and pull-type cutters require a
40 - 110 hp tractor.
The RCF(M)3010 cutters are designed for Category
ll or lll 3-point and semi-mount hitches or pull-type
attachment with 3-point requiring 60 - 110 hp tractor while
semi-mount and pull-type require 50 - 110 hp tractors.
Heavy-duty stump jumpers, main driveline clutches, and
outboard flex couplers are offered for driveline and
gearbox protection. Safety guards around the cutter are
offered in either single chain, double chain, or rubber.
See
“Specifications & Capacities”
“Features & Benefits”
on page 68 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
NOTE:
A special point of information that the
operator should be aware of before continuing.
