Land Pride Razor Pro ZRP44 Скачать руководство пользователя

Страница: 5 / 44

Important Safety Information

7/14/08

ZRP44 & ZRP52 Zero Turning Radius Mowers 356-117M

Land Pride

Table of Contents

Prepare for Emergencies

▲

Be prepared if a fire starts.

▲

Keep a first aid kit and fire

extinguisher handy.

▲

Keep emergency numbers for

doctor, ambulance, hospital and
fire department near phone.

911

Wear
Protective Equipment

▲

Protective clothing and equipment

should be worn.

▲

Wear clothing and equipment

appropriate for the job. Avoid
loose fitting clothing.

▲

Prolonged exposure to loud noise

can cause hearing impairment or
hearing loss. Wear suitable
hearing protection such as
earmuffs or earplugs.

▲

Operating equipment safely

requires the full attention of the
operator. Avoid wearing radio
headphones while operating
machinery.

Avoid High
Pressure Fluids Hazard

▲

Escaping fluid under pressure can

penetrate the skin causing serious
injury.

▲

Avoid the hazard by relieving

pressure before disconnecting
hydraulic lines.

▲

Use a piece of paper or

cardboard, NOT BODY PARTS, to
check for suspected leaks.

▲

Wear protective gloves and safety

glasses or goggles when working
with hydraulic systems.

▲

If an accident occurs, see a

doctor immediately. Any fluid
injected into the skin must be
surgically removed within a few
hours or gangrene may result.

These are common practices that may or may not be applicable to the products described in
this manual.

Safety Labels

1. Your mower comes equipped with all safety labels in place.

They were designed to help you safely operate your mower.
Read and follow their directions.

2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. To order new labels

go to your Land Pride dealer.

4. Some new equipment installed during repair requires safety

labels to be affixed to the replaced component as specified
by Land Pride. When ordering new components make sure
the correct safety labels are included in the request. To
order new labels go to your Land Pride dealer.

5. Refer to this section for proper label placement.

To install new labels:

Clean the area the label is to be placed.

Spray soapy water on the surface where the label is to
be placed.

Peel backing from label. Press firmly onto the surface.

Squeeze out air bubbles with the edge of a credit card.

Содержание Razor Pro ZRP44













































Результаты поиска

Содержание Razor Pro ZRP44

Отзывы:

Похожие инструкции для Razor Pro ZRP44

Бренды по названию

Популярные бренды

Land Pride Razor Pro ZRP44, Руководство оператора

Результаты поиска

Содержание Razor Pro ZRP44

Отзывы:

Похожие инструкции для Razor Pro ZRP44

Бренды по названию

Популярные бренды