8
Section 2 Operating
ZRP44 & ZRP52 Zero Turning Radius Mowers 356-117M
7/14/08
Land Pride
Table of Contents
Section 2 Operating
!
WARNING!
Do not operate mower while smoking!
Controls
Refer to Figure 2-2
For general location of controls described in this section,
refer to Figure 2-1.
Ignition Switch
A three position switch: off, run, and start. With key
inserted, rotate it clockwise to START position; release
key when engine starts, and switch will automatically
return to the RUN position.
Throttle Control
A cable is linked to engine throttle for controlling engine
speed. Move lever forward to increase engine rpm, move
lever rearward to decrease engine rpm.
IMPORTANT: When access is required under the
seat platform, make certain to place the control arms
in the park brake position (out) and pivot the arm rests
upward before placing the seat platform in the full
forward position to prevent arm rest damage.
Razor Pro Controls
Figure 2-1
1.
Ignition Switch
2.
Throttle Lever
3.
Control Levers
4.
Blade Engagement Switch
5.
Deck Lift Pedal
6.
Hour Meter
7.
Oil Pressure Light
8.
Fuel Tanks
9.
Hydraulic reservoir
10. Battery
11. Deck Adjusting Rod
12. Anti-Scalp Wheels
13. Discharge Chute
14. Left Deck Cover
15. Right Deck Cover
16. Deck Height Control
17. Park Brake Switch
18. Choke Lever
21044
1
2
3
4
5
7
8
9
8
11
12
13
14
15
16
11
12
12
12
10
18
6
12
17
17
Choke Control
A cable is linked to manually operate the engine choke.
When the lever is in the down position, the choke is in the
off (run) position. When the lever is pulled up, the choke is
in the on (start) position. DO NOT operate the machine
with the choke in the on (start) position.
Control Panel
Figure 2-2
Ignition Switch
Blade Engagement
Switch
Oil Pressure
Light
Throttle
Choke
20686
