20
Section 3 Adjustments
ZRP44 & ZRP52 Zero Turning Radius Mowers 356-117M
7/14/08
Land Pride
Table of Contents
6.
Refer to Figure 3-17 & Figure 3-18. Loosen all nuts on
the deck lift threaded rods, and the hardware on the
adjuster (on the right front), until all the deck lift chains
are loose, and the deck is sitting tightly on all four
blocks
.
Deck Level Adjustment
Figure 3-17
Deck Level Adjustment
Figure 3-18
7.
Refer to Figure 3-19. Loosen the two nuts on the front
of height indicator so that the foot pedal is free.
Deck Level Adjustment Foot Pedal
Figure 3-19
8.
Start the leveling process on the left front of the
mower.
9.
Refer to Figure 3-20. Set the amount of threads
protruding on the deck lift rod from the lift block at
approximately 1”
.
Left Rod Protruding Threads
Figure 3-20
10. Jam both nuts against the lift block.
11. Push or pull on the deck lift foot pedal until the chain
on the left front just becomes tight, making sure that
the deck stays tight against the 3” block.
Chain
Deck Lift
threaded Rod
Nut
Nut
21076
21056
5/16” Bolt
Jam Nut
Adjuster
Hardware
21057
Foot Pedal
Nuts
1”
Lift Block
Deck Lift Assist
Springs
Deck Lift Rod
1”
21075