Introduction
5/24/19
DB2660 & DBM2660 Ditch Bank Rotary Cutter 316-317M
13
Land Pride welcomes you to the growing family of new
product owners. This Ditch Bank Cutter has been
designed with care and built by skilled workers using
quality materials. Proper assembly, maintenance, and
safe operating practices will help you get years of
satisfactory use from this implement.
Application
The DB2660 Hydraulic Ditch Bank Cutter is designed
and built by Land Pride to provide excellent cutting
performance on ditch banks and other sloping areas
adjacent to right-of-ways, lakes, ponds, and streams.
They are designed to work equally as well in and around
areas of restricted access such as guardrails, low
overhanging branches, tree limbs, and hedges. These
units perform extremely well in tall grass cutting
applications and will easily cut through standing brush up
to one inch in diameter. Optional gauge wheels are also
available for customers who want to maintain a constant
cutting height with minimal control lever manipulation.
The DB(M)2660 cutter is designed for tractors in the 75
minimum hp range with a minimum weight of 7,000 lbs.
This cutter will fit Cat. ll 3-point hitches, or it will fit Cat.ll or
Cat. lll quick hitches.
The hydraulic drive requires 540 or 1000 rpm input power
take-off speed. Two duplex hydraulic outlets are required
on the tractor to operate the cutter’s extension arm
cylinder and deck pivot cylinder.
See
“Specifications & Capacities”
on page 50 and
“Features & Benefits”
on page 52 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
Introduction
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Ditch Bank Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new Ditch
Bank Cutter. If for any reason you do not understand any
part of this manual or are not satisfied with the service
received, the following actions are suggested:
1.
Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2.
If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3.
For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
NOTE:
A special point of information that the
operator should be aware of before continuing.
37349
