Page 25
Service mode
The service mode is used to change the value of total operating hours of the
equipment in the ACS and equipment parameters of the MFR.
Risk of damage to property!
Settings may be changed by specially trained personnel only.
Wrong settings might lead to serious damage of the equipment.
Menu selection:
Menu D1
>Display Settings
Press softkey „select“
Display
D2.3
„Display Settings“ shows up:
Press both softkeys (
A
) „up“ and „down“ at the
same time to activate the service mode for 10
minutes.
The text „
Service : active
“ shows up
above the line „Brightness“.
Change ACS Settings
Menu selection:
Menu D2.3
>back
Press softkey „select“
Menu D1
>Disp. Device : ACS
Press softkey „select“
Menu D2.1
>ACS - Settings
Press softkey „select“
Display
D3.2
„ACS - Settings“ shows up:
The value of the total operating hours of the
equipment can be changed here (e.g. after
replacement of the ACS or the compressor).
Use softkeys (
A
) „up“ and „down“ to scroll to
the value „Operating“.
Press softkey „select“.
Use softkeys (
A
) „up“ and „down“ to increase or to reduce the value.
Press the softkeys for a longer time to increase the rate of value changes.
Press the softkey „set“ to store the changed value.
Display Settings
Brightness : 10
Timeout[min] : 30
>back
______________________
up
|
down
| select
ACS - Settings
>Set Top : Operating
flow max : 10000 l/h
Operating : 12345 h
back
______________________
up
|
down
| select
Содержание ACS 5000
Страница 19: ...Page 19 Menu Configuration...
