Lancia Lybra, Руководство пользователя

Страница: 247 / 298

246
SPARE WHEEL AND TOOLS
The car may be equipped with a
space-saver or normal sized spare
wheel (where fitted).
The spare wheel, the jack and the
tool kit are in the boot in a compart-
ment under the floor carpet.
To reach the compartment, open the
tailgate, lift the carpet from the floor
and fasten its upper edge with the
specific belt
A ( fig. 36 ). The floor car-
pet can also be removed from the boot
from the back.
Remove the shim B ( fig. 37 ).
Release the locking device C ( fig. 38 ).
Take the tool kit D and the spare wheel
E and go to the wheel to be changed
IMPORTANT For instructions on
how to change a wheel correctly and
for the warnings and the precautions
to be adopted see “In an emergency”.
When you have finished, put the re-
moved wheel, the jack and the tool kit
back in the boot and fasten then cor-
rectly. Reposition the shim
B ( fig. 37 ).
Before lowering the floor carpet, fas-
ten the belt to the carpet as shown
(
fig. 39 ).
If you removed the carpet from the
boot, reposition it by inserting the
front tabs
F ( fig. 40 ) in the respective
recesses on the floor.
fig. 36
P4T0208
fig. 37
P4T0209
fig. 38
P4T0210
fig. 39
P4T0211
IF A TYRE IS PUNCTURED