background image

TABLE OF CONTENTS

SPECIFICATIONS......................................................................................................................................Cover

PERFORMANCE DATA ......................................................................................................................................i

TABLE OF CONTENTS .....................................................................................................................................ii

1. INSTALLATION ...........................................................................................................................................1

1.1 RECEIVING .................................................................................................................................................1

1.2

UNPACKING ......................................................................................................................................1

1.3

SELECTING INSTALLATION LOCATION..........................................................................................1

1.4

FILTERING THE WATER SUPPLY ....................................................................................................2

1.5

CONNECTING UNIT TO DRAIN........................................................................................................2

1.6

INSTALLING OVERFLOW .................................................................................................................2

1.7

CONNECTING UNIT TO POINT OF USE (POU) ..............................................................................2

1.8

CONNECTING UNIT TO WATER SUPPLY .......................................................................................3

1.9

TURNING WATER ON .......................................................................................................................3

1.10 CONNECTING UNIT TO ELECTRIC POWER SUPPLY (IF EQUIPPED WITH

POWER SUPPLY)..............................................................................................................................3

1.11 BOOST PUMP BYPASS PRESSURE SETTING (IF SO EQUIPPED) ..............................................3

1.12 SANITIZING AND PURGING SYSTEM UPON INSTALLATION .......................................................4

2. INSTALLATIONS .........................................................................................................................................5

2.1

TYPES OF EQUIPMENT TO BE CONNECTED ...............................................................................5

2.2

INSTALLATION OF A FOUR (4) GALLON STORAGE UNIT TO SYSTEM (PN 85-1330) ................5

2.3

INSTALLATION OF OPTIONAL EQUIPMENT...................................................................................5

3. CLEANING AND MAINTENANCE ..............................................................................................................6

3.1

FILTER REPLACEMENT ...................................................................................................................7

3.2

WATER QUALITY ..............................................................................................................................7

4. MEMBRANE REPLACEMENT INSTRUCTIONS .......................................................................................7

5. REPLACING THE STORAGE BAG............................................................................................................8

5.1

PURE LINK SYSTEM WITH 4 GALLON STORAGE BAG ................................................................8

5.2

PURE LINK SYSTEM WITH 38.5 GALLON STORAGE BAG ...........................................................8

6. TROUBLESHOOTING.................................................................................................................................8

6.1

UNIT IS NOT MAKING WATER .........................................................................................................8

6.2

BOOSTER PUMP IS NOT RUNNING ...............................................................................................8

6.3

PRODUCTION RATE OF PURE WATER SEEMS TO BE SLOWING DOWN..................................8

6.4

NO WATER OR VERY LITTLE WATER FLOWING TO DRAIN ........................................................8

6.5

SYSTEM CANNOT KEEP UP TO HOST UNIT, ICE MAKER, COFFEE MAKER, ETC....................9

6.6

BOOSTER PUMP WILL NOT SHUT OFF ONCE THE BAG IS FULL OR WATER

FLOWS OUT OF OVER FLOW DEVICE AT TOP OF UNIT..............................................................9

6.7

SYSTEM CHATTER PRIOR TO SHUT OFF .....................................................................................9

TUBE CONNECTIONS ....................................................................................................................................10

7. ILLUSTRATIONS, PARTS LISTINGS, AND WIRING DIAGRAMS ..........................................................11

7.1

LANCER PURE LINK REVERSE OSMOSIS (RO) SYSTEM.....................................................11-12

7.2

LANCER PRE-FILTER KIT, TWIN-PAC, 5 MICRON (10” AND 20”)

(OPTIONAL EQUIPMENT)...............................................................................................................13

7.3

LANCER PURE LINK DELIVERY PUMP KIT, PN 82-3202 (OPTIONAL EQUIPMENT).................13

7.4

LANCER PURE LINK DELIVERY PUMP, PN 86-0139 (OPTIONAL EQUIPMENT) .......................14

7.5

LANCER PURE LINK DELIVERY PUMP, PN 86-0132 (OPTIONAL EQUIPMENT) .......................14

TEST EQUIPMENT (AVAILABLE THROUGH LANCER CUSTOMER SERVICE).........................................15

LANCER PURE LINK WATER UNITS ............................................................................................................16

CERTIFICATE OF WARRANTY ......................................................................................................................17

ii

Содержание Pure Link 1300 Series





















Отзывы: