lancer 810 LX, Руководство пользователя

Страница: 22 / 68

CHAPTER 2
BEFORE YOU START
NU_810-815_LX_ANG_1306
22
In the case of washing items with small diameter openings such as volumetric flasks, it is very
important that the flow rate of the injectors used must be lower than the flow capacity of the flasks
to be washed in order to avoid a gradual filling of the flasks during the washing cycle. If the
diameter of the opening is too small to allow the water to escape from around the injector the
mechanical action of the injector can be absorbed by the water contained in the glassware giving
poor cleaning results. It is imperative to use baskets with injectors of proper diameter and, above
all, to secure lightweight items with a "GC" or "GCI" hold down screen.
In order to wash items on a "PL" type
basket (for cleaning slides), place the
baskets on the "PS" (basic rack) or
"PSB" (basic rack with spray arm) after
removing one or more "GS" (support
grids). Check that the basket is correctly
fitted on the rods of the rack designed
for that purpose. Reinstall the grilles for
any washing operation that does not
require the use of "PL" type baskets.
You should only use baskets that are suitable for the parts to be washed. When your washer is put
into service, our technicians will give you useful advice on the best way to load the racks relative to
the items to be washed.
Please feel free to contact GETINGE LANCER for advice or assistance.
When several racks are used simultaneously on the different levels, only one rack should be pulled
out of chamber on the door and the runners at a time.