lancer 810 LX, Руководство пользователя

Страница: 59 / 68

CHAPTER 5
MAINTENANCE OF THE WASHER
NU_810-815_LX_ANG_1306
59
5. PREVENTIVE MAINTENANCE
GETINGE LANCER’S TECHNICAL ASSISTANCE SERVICE recommends to all the users at least
one annual preventive maintenance visit.
The preventive maintenance reduces the risks of stops of the washer due to breakdowns and
enables enlarge the life duration of the equipments.
Depending on the countries where the washer is used and the local norms, a higher frequency of
preventive maintenance visits can be necessary.
6. PREVENTATIVE MAINTENANCE SCHEDULE
FUNCTION
Daily Biannual 1 Year 2 Year 5 Year
C
LEAN FILTER SYSTEM IN CHAMBER
.
X X X X X
C
HECK CHEMICAL CONTAINERS FOR ANY LEAKAGE
.
X X X X X
E
NSURE CHEMICAL HOSES ARE NOT PINCHED
.
X X X X X
C
LEAN EXTERIOR PANELS
.
X X X X X
I
NSPECT WATER SUPPLY HOSES FOR CRACKS
,
BULGES
,
AND LEAKS
.
X X X X
E
NSURE THE WATER HOSE SEALS AND FILTERS ARE CLEAN AND HAVE NO CRACKS
.
X X X X
C
HECK CHEMICAL SUPPLY HOSES FOR CRACKS
,
BULGES AND LEAKS
.
X X X X
I
NSPECT INTERNAL TUBING ON CHEMICAL PUMPS FOR WEAR
.
(I
F APPLICABLE
)
X X X X
C
HECK CHEMICAL LEVEL SENSORS FOR CORRECT OPERATION
.
(I
F APPLICABLE
)
X X X X
E
NSURE ALL PANELS ARE PROPERLY SECURED
. X X X X
C
HECK ALL INTERNAL HOSES FOR CRACKS
,
BULGES AND LEAKS
. X X X X
E
NSURE ALL HOSE CLAMPS ARE PROPERLY TIGHTENED
.
X X X X
C
HECK ALL COLUMN SEALS FOR LEAKS AND CRACKS
.
X X X X
C
HECK SPRAY ARM SUPPORT SEALS FOR LEAKS AND CRACKS
.
X X X X
C
HECK SPRAY ARMS AND BUSHINGS FOR WEAR
.
X X X X
C
HECK DOOR SEAL AND GASKET FOR LEAKAGE
.
X X X X
I
NSPECT THE DOOR SPRINGS
,
DOOR WHEELS AND THEIR SLING
,
HOOKS
,
DOOR SWITCH FOR
PROPER OPERATION
.
X X X X
C
HECK RECYCLING AND EMPTYING PUMP SEALS FOR LEAKAGE AND QUIET OPERATION
.
X X X
C
HECK FOR LOSE ELECTRICAL CONNECTIONS AT COMPONENTS AND ELECTRONIC CARDS
.
X X X
V
ERIFY THE CORRECT OPERATION OF ALL RELAYS AND THEIR ASSOCIATED COMPONENTS
.
X X X
C
HANGE THE HEATING RELAY
.
X
(1) Daily maintenance must be handled by users staff.
(2) Others maintenances (bi-annual, 1 year, 2 years & 5 years) must be carry out by the
GETINGE LANCER’s technical assistance service.