Lance Design ADX-3200, Краткое руководство по эксплуатации

Страница: 6 / 6

6

Connecting the Truck End

Connect the primary fiber to the PRI fiber connector on the rear of the ADX-3200
and the optional backup fiber to the SEC connector. If a separate switch is being
used it may be connected to the 3200 with either the copper or fiber ports.

Connect AC power to the power connector on the rear panel.

Connect dry, line-level audio inputs and outputs as required. The analog inputs
and outputs are +4dBm, balanced. Typically the first 16 inputs and outputs are
used for mic outs, ifb ins, pgm ins, etc. The last 8 inputs and outputs are typically
used for PLs and perhaps talkbacks (which can be mixed by assigning to an
unused PL output).
Lance Design ADX-3200 Analog Pinout (Inputs and Outputs) Tascam/Protools Standard
Audio
Channel
D-25 Pin Audio
Channel
D-25 Pin Audio
Channel
D-25 Pin
CH 1 + 24 CH 9 + 24 CH 17 + 24
CH 1 -
12
CH 9 -
12
CH 17 -
12
CH 1 SHLD 25 CH 9 SHLD 25 CH 17 SHLD 25
CH 2 + 10 CH 10 + 10 CH 18 + 10
CH 2 - 23 CH 10 - 23 CH 18 - 23
CH 2 SHLD 11 CH 10 SHLD 11 CH 18 SHLD 11
CH 3 +
21
CH 11 +
21
CH 19 +
21
CH 3 - 9 CH 11 - 9 CH 19 - 9
CH 3 SHLD 22 CH 11 SHLD 22 CH 19 SHLD 22
CH 4 + 7 CH 12 + 7 CH 20 + 7
CH 4 -
20
CH 12 -
20
CH 20 -
20
CH 4 SHLD 8 CH 12 SHLD 8 CH 20 SHLD 8
CH 5 + 18 CH 13 + 18 CH 21 + 18
CH 5 - 6 CH 13 - 6 CH 21 - 6
CH 5 SHLD 19 CH 13 SHLD 19 CH 21 SHLD 19
CH 6 +
4
CH 14 +
4
CH 22 +
4
CH 6 - 17 CH 14 - 17 CH 22 - 17
CH 6 SHLD 5 CH 14 SHLD 5 CH 22 SHLD 5
CH 7 + 15 CH 15 + 15 CH 23 + 15
CH 7 -
3
CH 15 -
3
CH 23 -
3
CH 7 SHLD 16 CH 15 SHLD 16 CH 23 SHLD 16
CH 8 + 1 CH 16 + 1 CH 24 + 1
CH 8 - 14 CH 16 - 14 CH 24 - 14
CH 8 SHLD
2
CH 16 SHLD
2
CH 24 SHLD
2
6 FEMALE CONNECTORS ON CHASSIS [INPUT AND OUTPUTS]